D142
9
D142
D142
D142
C
USTOMISING THE HANDSET
Handset naming
The default name of the handset is "
handset N
" where
N
is the number of the registered handset.
1.
Go to the menu "
personal set
"
/ "
handset name
".
2.
Use the keypad to enter the new name (up to 10 characters).
Use
key to delete wrong input if necessary. Press
OK
.
Handset ringer level
1.
Go to the menu "
personal set
"
/ "
handset tone
" / "
ring volume
".
2. Use
or
to select the volume level then press
OK
to confirm your selection.
Handset ringer melody
1.
Go to the menu "
personal set
"
/ "
handset tone
" / "
ring tones
".
Ten melodies are available: "
melody 1
"… "
melody 10
".
2. Use
or
to select the ring tone. Press
OK
.
Key tone On/Off
1.
Go to the menu "
personal set
"
/ "
handset tone
" / "
key beep
".
An information screen shows you the current state. Use
or
to modify it.
2. Press
OK
key to confirm your selection.
Modifying the language
1.
Go to the menu "
personal set
"
/ "
language
".
2. Use
or
to choose the desired language. Press
OK
key to confirm your selection.
Auto talk
When active, the auto talk off feature enables you to automatically hang up as soon as you put the
handset on its base.
1.
Go to the menu "
personal set
"
/ "
auto hang-up
".
An information screen shows you the current state. Use
or
to modify it.
2. Press
OK
key to confirm your selection.
Key lock
1. Press
and
hold key for 1 second. An information screen shows you that the keys are locked.
2.
To recover to normal, press and hold
key 1 sec.
S
ETTING THE DATE AND TIME
Time and date
After a power cut the time has to be reset.
1.
Go to the menu "
clock & alarm
"
/ "
date/time
". Current date is displayed.
-
To keep the date, press
OK
.
-
To change it, enter the new date in 20YY/MM/JJ format.
-
To go back to change the entry
.
10
D142
D142
D142
2. Press
OK
. Current time is displayed.
-
To keep the time, press
OK
.
-
To change it, enter the new time in the HH : MM format. (If, after entering the time, the time
format is
12H
, use the
key to set
aM
and the
key to set
pM
).
-
To go back to change the entry
.
3. Press
OK
.
Hour format (12/24)
1.
Go to the menu "
clock & alarm
"
/ "
set format
" / "
time format
".
A screen displays the current format, use
or
to change it.
2. Press
OK
.
Date format
1.
Go to the menu "
clock & alarm
"
/ "
set format
" / "
date format
".
A screen displays the current format, use
or
to change it.
2. Press
OK
.
Alarm clock
1.
Go to the menu "
clock & alarm
"
/ "
alarm
".
To activate the alarm once, select "
on once
".
To repeat the alarm each day at the programmed time, select "
on daily
".
To deactivate the alarm, select "
off
".
2.
Select your choice then press
OK
.
Enter the time when you want the alarm to go off: "
HH – mm
".
(If after entering the time, the time format 12H, use
key to set
aM
and the
key
to set
pM
).
3. Press
OK
.
Modifying alarm tone
1.
Go to the menu "
clock & alarm
"
/ "
alarm tone
".
3 melodies are available: "
melody 1
", "
melody 2
" et "
melody 3
".
2.
Select the desired melody, press
OK
key to confirm your selection.
You will hear a confirmation tone.
A
DVANCED SETTINGS
Base master PIN code
Your base station code (default setting
0000
) is required to access certain security functions. This code
can include 8 digits.
1.
Go to the menu "
advanced set
"
/ "
change pin
".
2.
Enter your old code first, press
OK
.
3.
Enter your new PIN code.
Each time a digit is entered the «_»is replaced by a «*».
Press
OK
key to confirm your new PIN code. You will hear a confirmation tone.
Carefully note your base station code. You will need it to change certain settings.
11
D142
D142
D142
Association handset & base
1. Press
and
hold key for 5 seconds (after 1 minute if no Handset has started association process
the base goes back to standby).
2.
Go to the menu "
advanced set
"
/ "
registration
".
3.
Enter the 4 digit base master PIN code (default 0000). Press
OK
.
4.
Once the handset is registered. The handset automatically exits the registering mode.
5.
The handset number assigned automatically by the base appears on the screen.
Disassociation of a handset
1.
Go to the menu "
advanced set
"
/ "
unregister
".
2.
Enter the 4 digit base master PIN code (default 0000). Press
OK
.
3.
Select the handset you want to delete using the
or
key then press
OK
(at standby state,
"
pls reg h/s
" is displayed on the screen.
Selecting the country
1.
Go to the menu "
advanced set
"
/ "
unregister
".
2.
Enter the 4 digit base master PIN code (default 0000). Press
OK
.
3.
Select the country where you are using the telephone. Press
OK
.
4.
A confirmation screen appears, press
OK
.
Restoring the Handset / Base Default Settings
1.
Go to the menu "
advanced set
"
/ "
reset
".
2.
A confirmation screen appears, press
OK
.
Prefix (Depending on Country)
If a PABX is used in a private network, you can program the outside call prefix.
This function sets:
-
The PABX prefix number:
this number will be added at the beginning of the number you dialled.
-
The number to be detected:
if the number you dialled starts with the recorded sequence, this
sequence will be automatically deleted.
These two settings are not applied if number you dialled starts with
"#", "*" or "P".
1.
Go to the menu "
advanced set
"
/ "
auto prefix
".
- Select
"
detect digit
" to define the number giving you access to the outside line.
- Select
"
prefix
" to specify the «digits before prefix».
2. Press
OK
.
Flash timing
If you connect your telephone to a private automatic branch exchange or use it in a foreign country, you
may need to modify the flash duration in order to use your telephone correctly with regard to the following
functionalities: outgoing 2nd call, incoming 2nd call, conference call.
Contact your administrator, who will supply the appropriate time period, and proceed to the new settings.
1.
Go to the menu "
advanced set
"
/ "
recall time
".
2.
Select the appropriate time period, press
OK
.
Modifying the dialing mode
Most telephone systems use the tone dialling mode. You can, however, use the pulse dialling mode:
1.
Go to the menu "
advanced set
"
/ "
dial mode
".
2.
Two modes are available: "
tone
" and "
pulse
".
3. Press
OK
.
12
D142
D142
D142
First ring
When this function is activated, the receiver rings as soon as a call is received, without waiting for the
number to be displayed. If you have activated this function, it will be automatically deactivated when a call
is received with the number displayed (if you have this service).
1.
Go to the menu "
advanced set
"
/ "
first ring
".
2. Use
the
or
key
to change the state.
3. Press
OK
.
B
ATTERIES SAFETY PRECAUTIONS
To avoid any risk of explosion:
Make sure you have inserted the batteries correctly.
Use only with 1,2V 400mAh type or equivalent rechargeable batteries pack.
Do not dispose of the batteries in a fire. The cell may explode.
Check with local code for possible special disposal instructions.
Do not burn, disassemble, mutilate or puncture. Like other batteries of this type, toxic materials could be
released which can cause injury.
To reduce the risk of fire or personal injury, use only the battery listed in the user’s guide.
Keep batteries out of the reach of children.
Remove batteries if storing over 30 days.
G
ENERAL PRODUCT CARE
To keep your telephone working and looking good, follow these guidelines:
Avoid putting the phone near heating appliances and devices that generate electrical noise (for example,
motors or fluorescent lamps).
DO NOT expose to direct sunlight or moisture.
Avoid dropping and other rough treatment to the phone.
Clean with a soft cloth.
Retain the original packaging in case you need to ship the phone at a later date.
T
ROUBLESHOOTING
Causes of poor reception:
Aluminium
siding.
Foil backing on insulation.
Heating ducts and other metal construction can shield radio signals.
You are too close to appliances such as microwaves, stoves, computers, etc).
Atmospheric conditions, such as strong storms.
Base installed in the basement or lower floor of the house.
Base is plugged into an AC outlet with other electronic devices.
Baby monitor is using the same frequency.
Handset batteries is low.
You are out of range of the base.
13
D142
D142
D142
Auto-diagnostics
Problem
Solution
No display.
x
Make sure the batteries are properly installed.
x
Place the handset on the base and fully charge the batteries.
x
To increase the life of your batteries, you can perform this operation about
every two months.
x
If these precautionary measures do not resolve this issue, replacement
batteries are available through your reseller.
x
As time goes by, you may notice a slight decrease in battery performance. Use
your handset until the battery is fully discharged, and then charge it for at least
15 hours.
Handset does
not ring.
x
Make sure the RINGER setting on the handset is programmed to ON.
x
You may have too many extension phones on your line. Try unplugging some
phones.
You experience
static, noise or
fading in and
out.
x
Is handset out of range?
Move closer to the base.
x
Does the base need to be relocated?
x
Charge batteries.
x
Make sure base is not plugged into an outlet with another household appliance.
Unit beeps
- Place handset in base for 20 seconds to reset the security code. If that doesn’t work, charge batteries for 15
hours.
- Clean charging contacts on handset and base with a soft cloth
- Replace
batteries.
Memory dialling
- Did you program the memory location keys correctly?
- Did you follow proper dialling sequence?
- Make sure the tone/pulse setting is correct.
- Did you reprogram numbers into memory after power outage or batteries replacement?
E
NVIRONMENT
Preservation of the environment is an essential concern of SAGEMCOM. The desire of SAGEMCOM is to
operate systems observing the environment and consequently it has decided to integrate environmental
performances in the life cycle of its products, from manufacturing to commissioning, use and elimination.
Packaging
The presence of the logo (green dot) means that a contribution is paid to an approved
national organisation to improve packaging recovery and recycling infrastructures.
To facilitate recycling, please respect the sorting rules set up locally for this kind of waste.
Batteries
If your product contains batteries, they must be disposed of at appropriate collection
points.
14
D142
D142
D142
The product
The crossed-out waste bin stuck on the product or its accessories means that the product
belongs to the family of electrical and electronic equipments.
In this respect, the European regulations ask you to dispose of it selectively:
x
At sales points in the event of the purchase of similar equipment.
x
At the collection points made available to you locally (drop-off centre, selective
collection, etc.).
In this way you can participate in the re-use and upgrading of Electrical and Electronic Equipment Waste, which
can have an effect on the environment and human health.
T
ERMS AND
C
ONDITIONS FOR
U
NITED
K
INGDOM
& I
RELAND ONLY
In order to apply the guarantee, you should contact the SAGEMCOM Helpdesk or the retailer where you
purchased the equipment. Proof of purchase will be required in either case.
Please make sure that you use your equipment only for the purpose for which it was designed and under normal
usage conditions.
SAGEMCOM do not accept any liability for the equipment if used outside the frame of its original designed
purpose or any consequence that may arise from this usage.
Should any malfunction arise, the SAGEMCOM Helpdesk or your retailer will advise you how to proceed.
A) General Guarantee conditions
SAGEMCOM undertakes to remedy by repair or exchange at its own convenience, free of charge for labour and
replacement parts, any defects in the equipment during the guarantee period of 12 (twelve) months or 3 (three)
months for accessories, from the date of original invoice of the Equipment, where those defects are a result of
faulty workmanship.
Unless the customer has concluded with SAGEMCOM a maintenance contract in respect of the equipment which
specifically provides for repairs to be carried out at the customer's premises, the repairs will not be carried out on
the equipment at the customer premises.
The customer must however return the defective equipment at his/her own expense, to the address supplied by
the SAGEMCOM Helpdesk or by the retailer.
In the case that a product needs to be sent in for a repair, it must always be accompanied by a proof of purchase
(which is not altered, written on or in any way made illegible) showing that the product is still under guarantee. In
the case that no proof of purchase is enclosed, the SAGEMCOM repair centre will use the production date as its
reference for establishing the guarantee status of the product.
Apart from all legal obligatory rules, SAGEMCOM, do not give any Guarantee, either implicit or explicit which is
not set force in the present section, and can not be held responsible for any direct or indirect, material or
immaterial damage, either in or out of the frame of the present guarantee.
If any provision of this guarantee shall be held to be in whole or in part invalid or illegal due to an obligatory rule
applicable to consumers pursuant to their national legislation, such invalidity or illegality shall not impair or affect
the remaining provisions or parts of this guarantee.
This guarantee does not affect the Customer statutory rights.
B) Exclusions From Guarantee
SAGEMCOM shall have no liability under the guarantee in respect of:
x
Damage, defects, breakdown or malfunction due to one or more of the following:
- Failure to properly follow the installation process and instructions for use
- An external cause to the equipment (including but not limited to: lightening, fire, shock, vandalism,
inappropriate conditions of electrical network or water damage of any nature)
- Modifications made without the written approval of SAGEMCOM
- Unsuitable operating conditions, particularly of temperature and humidity
- Repair or maintenance of the equipment by persons not authorised by SAGEMCOM
x
Wear and tear from normal daily use of the equipment and its accessories
x
Damage due to insufficient or bad packaging of equipment when returned to SAGEMCOM
x
Usage of new versions of software without the previous approval of SAGEMCOM
x
Work on any equipment or software modified or added without the prior written consent of SAGEMCOM
15
D142
D142
D142
x
Malfunctions not resulting from the Equipment or from software installed in user workstations for the
purpose of use of the equipment
Communication problems related to an unsuitable environment including:
- Problems related to access and/or connection to the Internet such as interruptions by access networks or
malfunction of the line used by the subscriber or his correspondent
- Transmission faults (for example poor geographical coverage by radio and TV transmitters, interference
or poor line quality)
- Local network faults (wiring, servers, workstations) or the failure of the transmission network (such as but
not limited to interferences, fault or poor quality of the network
- Modification of the parameters of the cellular or broadcast network carried out after the sale of the
Product
x
Normal servicing (as defined in the user guide supplied with the equipment) as well as malfunctioning due
to servicing not being carried out. Servicing costs are in any event always borne by the customer.
x
Malfunctions resulting from the usage of products, consumables or accessories not compatible with the
equipment.
C)
Out of Guarantee Repairs
In the cases set forth in B) as well as after expiry of the guarantee period, the customer must ask the Authorised
SAGEMCOM Repair Centre for a cost estimation prior to work being carried out.
In such cases, the repair and delivery costs will be invoiced to the customer.
The foregoing shall apply unless otherwise agreed in writing with the customer and only for the United Kingdom
and Ireland.
www.sagemcom.com
T
ERMS AND
C
ONDITIONS FOR OTHER COUNTRIES
If, despite our best efforts, your product presents any defects, you should refer to your retailer and present the
proof of purchase that they gave you on the day of purchase.
Should any malfunctioning arise, the retailer will advise you what to do.
For the warranty to apply, you should ensure that the product was used in accordance with the instructions for
use and the purpose for use, and that you have at your disposal the sales invoice or receipt stating the date of
purchase, the name of the retailer, the reference and the serial number of the product.
No coverage shall be given under this warranty if the following conditions are applicable:
x
The required documents have been modified or altered in order to take advantage of the warranty.
x
The manufacturing numbers, product brands or labels have been altered or made illegible.
x
Interventions on the product have been made by an unauthorized person.
x
The product has been subjected to abnormal or improper use.
x
The product has been damaged by external factors such as lightning, over-voltage, moisture, accidental
damage, improper care as well as all Acts of God.
This present warranty does not affect the consumer rights that you may have under the laws in effect in your
country
Important:
Should you return the product to the after-sales department, please ensure that you return as well all the
elements and accessories originally supplied with the product.
x
accidental damage, improper care as well as all Acts of God.
This present warranty does not affect the consumer rights that you may have under the laws in effect in your
country
253437152A
Dépliant LU D142 EN__253437152A.fm Page 2 Mercredi, 9. septembre 2009 2:36 14
