10
11
opeRatING yoUR NeW appLIaNCe
GRINdeR oVeRVIeW
Your Smart Grinder™ Pro uses hardened
stainless steel Concial Burrs to grind whole
bean coffee suitable for a range of brewing
methods, from the finest setting for espresso
to the coarsest setting for plunger. You are
able to select the amount of shots or cups with
a single button. The grind amount (dose) for
all coffee types is controlled by a digital timer.
The default dose for each brew method can be
adjusted by turning the Grind Amount Dial
and changing the time the grinder will run.
Once you have the desired dose, you can press
and hold the PROGRAM button to set your
custom time. You can grind directly into
a portafilter, grinds container or drip coffee
filter basket.
BeFoRe FIRSt USe
Remove and safely discard all promotional
labels and packing materials attached to your
Sage product.
Wash hopper, cradles, grind container,
container lid and cleaning brush in warm
soapy water and dry thoroughly. Wipe
exterior of grinder with a soft damp cloth and
dry thoroughly. Place grinder on flat level
surface and plug power cord into 230–240V
outlet and switch Power ‘ON’.
eNeRGy SaVING FeatURe
The grinder will automatically switch
off if not used after 5 minutes.
To reactivate the machine whilst in
POWER SAVING/SLEEP MODE, press
any button on the grinder control panel.
Note
If bean hopper has not been locked
into position, ‘PLEASE LOCK HOPPER’
message will be displayed on the LCD
screen disabling the operation of the
grinder for safety.
aSSeMBLING yoUR SaGe SMaRt
GRINdeR™ pRo
Bean Hopper
Align tabs on the base of the bean hopper
and insert hopper into position. Turn the
bean hopper dial 90° to lock into position.
Fill with fresh coffee beans and secure lid
on top of bean hopper.
The bean hopper can be removed by turning
dial anti clockwise and lifting hopper to pull
out. The locking system allows you to remove
and transfer beans in the hopper to a storage
container safely.
Within each brew method (espresso, percolator,
filter or plunger), there is a range of grind
size settings. Between each brew method the
grind size settings will differ. This is due to
each method requiring different grind sizes for
optimum extraction.
Experiment with different grind size settings
by rotating the Grind Size dial to achieve the
brew that best suits your taste.
START PAUSE
GRIND AMOUNT
SHOTS CUPS
CANCEL
PROGRAM
GRINdING FoR eSpReSSo CoFFee
Use single wall filter baskets when grinding
fresh coffee beans. Use the finer 1–30 settings
in the ESPRESSO range.
Step 1:
Insert the appropriate portafilter cradle size.
Insert your portafilter into the cradle.
PUSH
50-54mm
58mm
CRADLES
Note
You can change the amount already
selected during operation by pressing
the SHOTS|CUPS button. Maximum
number of shots with the cradle
inserted is 2.
Step 2:
Selecting your SHotS|CUpS
Select the desired amount of ground coffee
required by pressing the SHOTS|CUPS button.
START PAUSE
GRIND AMOUNT
SHOTS CUPS
CANCEL
PROGRAM
Continue pressing the SHOTS|CUPS button
until desired amount is displayed.
The maximum number of shots or cups for
each brew method is shown in the coffee
chart below. The amount dispensed will vary
depending on the brew method selected and
the grind amount.
Rotate the Grind Amount Dial to adjust the
grinding time to achieve the correct amount of
coffee. Increasing time will increase the dose
and decreasing the time will decrease the dose.
START PAUSE
GRIND AMOUNT
SHOTS CUPS
CANCEL
PROGRAM
PLUNGER
1 UP TO 12 CUPS
BREW METHOD
GRIND SETTING
GRIND SIZE
AMOUNT
FINE
1-30
1 UP TO 8 SHOTS
ESPRESSO
DRIP FILTER
MEDIUM COARSE
46-54
COARSE
55-60
1 UP TO 12 CUPS
PERCOLATOR
31-45
1 UP TO 12 CUPS
MEDIUM
CoFFee CHaRt
opeRatING yoUR NeW appLIaNCe
