background image

11

EN

3.  We recommend using cone fi lter basket insert 

for single cups. 

4.  Insert the Cone fi lter basket into the brew 

basket. Use the alignment marks as a guide.

5.  Place a cone shaped paper fi lter into the cone 

fi lter basket.

6.  Grind the correct amount of whole bean coff ee 

for the amount being brewed.

7.  Select desired brewing mode. 
8.  Press START / CANCEL to begin brewing.

AUTO START

Allows you to automatically start brewing 

at preset time.
1.  Set fi lter basket type for the amount 

of coff ee being brewed.

2.  Select your brewing mode.
3.  Fill the water tank with enough fresh cold water 

for the amount of coff ee being brewed.

4.  Insert the brew basket with your desired insert 

or paper fi lter and add ground coff ee.

5.  Insert the appropriate cup or the carafe with 

the lid locked in place into the machine.

6.  Press the AUTO START button.   

FAST

GOLD

SET CLOCK STANDBY

KEEP WARM

EXIT

DESCALE

SOUND

SETTINGS

COLD BREW

MYBREW

POUROVER

STRONG

BLOOM TIME

BLOOM VOL.

BREW TEMP.

FLOW RATE

CUSTOMIZE

CARAFE LID

REMOVE

FILL

AUTO START

TANK!

TIME SINCE BREW

MIN
HEATING BLOOMINGBREWING

AM

PM

HR

MAX

AT

7.  The machine will prompt you to set the time 

for Auto Start. Rotate the SELECT dial to adjust 

Auto Start time, press SELECT dial to set. 

Auto Start is now set and the machine will 

enter Auto Start mode, brewing automatically 

at the set Auto Start time. 

NOTE

COLD BREW mode will be disabled if there is more 

than 4 cups of water in the tank.

SINGLE CUP / SMALLER VOLUMES 

(LESS THAN 4 CUPS)

1.  Your Sage

®

 Precision Brewer will recognise 

when the brewer has less than 4 cups of water 

and will adjust the brew settings, automatically. 

Fill your cup with fresh cold water and then pour 

it into the water tank, ensuring the water level 

stays below the SINGLE CUP line.

450

MLS

CUPS

12

600

4

150

300

1200

8

1800

10

900

6

1500

MAX

SINGLE CUP 

COLD BREW

MAX

CARAFE 

MAX

CONE

NOTE

DO NOT fi ll the water tank above the SINGLE 

CUP marking or the volume of the cup being used. 

Otherwise it will overfl ow, as the machine brews until 

the water tank is empty.
2.  Place your empty cup underneath the brew 

basket outlet.

Содержание Precision Brewer SDC400













Отзывы: