background image

10

Troubleshooting

Juicer will not work 

when switched ON

•  The safety locking arm may not be correctly engaged in the vertical 

operating position. Check the top cover is properly aligned and the locking 

arm is located firmly into the two grooves on either side of the juicer cover.

•  Motor overload protection may have operated (see below).

Overheating with 

excessive loads

•  The juicer is equipped with an internal self-resetting overload to prevent the 

motor from damage under heavy or continuous loads. If the motor suddenly 

stops working, turn the dial to OFF, and unplug the unit from the power 

outlet. Allow the juicer to cool for at least 30 minutes before operating again.  

NOTE: The unit MUST be turned off in order for it to cool and be reset.

•  Despite this overload protector, we suggest juicing in smaller batches, 

without excessive pushing force, to avoid overheating and stalling and to 

maintain the life of the motor.

Excess pulp building 

up in the stainless 

steel filter basket

•  Stop juicing, disassemble to scoop excess pulp off the juicer cover.  

Reassemble and continue juicing. Alternating soft and hard ingredients 

may help avoid this. 

Pulp too wet 

and reduced 

extracted juice

•  The cleaner the filter, the better the juice yield, and dryer the pulp. Be sure 

to thoroughly clean the juicer as soon as possible after each use. Remove 

the stainless steel filter basket and thoroughly clean mesh walls with a 

cleaning brush. Rinse the filter basket under hot water. If the fine mesh 

holes are blocked, soak the basket in a solution of hot water with 10% 

lemon juice to unblock the holes or wash in the dishwasher (top shelf). 

This will remove excess fiber build up which could be inhibiting the flow.

Juice leaks between 

the rim of the juicer 

and the juicer cover

•  Try a slower juicing speed (if possible) and push the food pusher down the 

feed chute more slowly.

Juice sprays out  

from spout

•  The juice is being extracted too High; try a slower juicing speed (if possible) 

and push the food pusher down the feed chute more slowly.

Содержание Nutri Juicer Cold Plus BJE530









Отзывы: