Sage BTM800, Инструкция

Страница: 23 / 25

23
Troubleshooting
PROBLEM POSSIBLE CAUSE
Tea Maker™ will
not switch ‘ON’
•
Check the power plug is securely inserted into
the outlet.
•
Insert the power plug into an independent outlet.
•
Insert the power plug into a different outlet.
•
Reset the circuit breaker if necessary.
•
For additional safety the Tea Maker™ is fitted
with a thermal cut out. In the event of severe
overheating, the Tea Maker™ will automatically
shut down to prevent further damage. Should this
continue, call the Sage
®
Customer Service
Centre 0808 178 1650.
The Tea Maker™
will not work
•
Check the glass jug is securely positioned on the
power base.
The LCD light has
gone out
?
•
The Tea Maker™ goes into standby mode if not
used for 3 minutes.
•
To re-activate the Tea Maker™ out of standby
mode:
- Remove then replace the glass jug from the
power base.
- Press any button on the power base except the
HOT WATER/Cancel or TEA/Cancel buttons.
The LCD screen will re-illuminate.
I cannot select
a certain function
•
Certain features cannot be selected or changed
during the heating or brewing cycle. The LCD
screen may temporarily change or a sound alert
may be heard, but no changes to the cycle will
be made.
The LCD screen
displays ‘RESET’
•
The LCD screen will display a flashing ‘RESET’
when there is a resettable electronic issue.
Remove the plug from the wall outlet,
wait 5 seconds, then plug back in.
•
Call Sage
®
Customer Service 0808 178 1650
if the ‘RESET’ message continues.
The LCD screen
displays ‘ERROR’
•
The LCD screen will display a flashing ‘ERROR’
when there is a non-resettable issue with the
appliance. Should this occur, call the Sage
®
Customer Service Centre 0808 178 1650.