IMPORTANT SAFETY INSTRUCTIONS
This warmer is to be used SOLELY for warming premoistened cloth and hair care products manufactured by Sage Products LLC. The warmer has been designed and
safety tested to be used exclusively with these products. ANY other use of the warmer by the facility including, but not limited to, use with other bathing products, can
result in overheating, fire or other hazardous conditions and is expressly forbidden.
WARNING :
To reduce the risk of fire, burns, electrical shock or injury:
1. Read all instructions before using this warmer.
2. Grounding reliability can only be achieved when the equipment is connected to an equivalent receptacle marked “hospital only” or “hospital grade.”
3. Install this warmer only in accordance with the installation instructions found in this manual.
4.
DO NOT
cover or block any openings on this appliance.
5.
DO NOT
tamper with or make any adjustments to the control panel, housings, safety switches, or any other part of the warmer.
6.
DO NOT
remove any panel or cover.
7.
DO NOT
store or use this appliance outdoors.
DO NOT
use this product near water—for example, near a kitchen sink, in a wet basement, or near a
swimming pool.
8.
DO NOT
use this warmer for any material other than premoistened cloth and hair care products manufactured by Sage Products, in accordance with
instructions on the label.
9.
DO NOT
let the cord hang over edge of table or counter.
10. This warmer is to be used by adults familiar with its operation and these safety instructions.
11.
DO NOT
operate this warmer if it has a damaged cord or plug, if it is not working properly, or if it has been damaged or dropped.
12.
DO NOT
immerse cord or plug in water.
13.
DO NOT
operate this warmer if any component is broken. Contact Sage Products for repair or replacement.
14. Keep cord away from heated surfaces.
15. The warmer is to be serviced only by qualified service personnel. If there are no external or user-serviceable fuses, contact Sage Products for repair or adjustment.
For external or user-serviceable fuses, check them and replace if necessary. If new fuses do not correct the condition, or if fuses continue to blow, contact
Sage Products for repair or adjustment.
16. Use this appliance only for its intended purpose as described in this manual.
DO NOT
use corrosive chemicals or vapors in this appliance. This type of warmer is
specifically designed to warm premoistened cloth and hair care products manufactured by Sage Products. It is
NOT
designed for industrial or laboratory use. The
use of corrosive chemicals in heating or cleaning will damage the appliance and may result in product failure.
17.
TO REDUCE THE RISK OF FIRE:
•
Warm only premoistened cloth and hair care products manufactured by Sage Products.
•
DO NOT
use to heat or store any other material or products.
•
If materials inside the warmer should ignite, keep the door(s) closed, turn the warmer off, and disconnect the power cord, or shut off power at the fuse
or circuit breaker panel.
18.
DO NOT
store flammable materials in the proximity of the warmer. It could be a fire hazard.
19. Equipment not suitable for use in the presence of a flammable anesthetic mixture with air, or with oxygen or nitrous oxide.
20. This warmer uses conduction heating.
21. The warmer should
NOT
be adjusted outside of menu driven options by anyone except properly qualified personnel. Contact Sage Products for
authorized service.
22. Medical electrical equipment needs special precautions regarding electromagnetic compatibility (EMC) and needs to be installed and put into service according
to these instructions. The end user of this product should assure it is used in such an environment that the power frequency magnetic fields should be at levels
characteristic of a typical location in a typical commercial or hospital environment.
- 2 -