Care & Operation of your New
26 LED UV Blacklight
CAUTION
1. Inspect cord regularly for damage and replace if necessary for user safety.
2. Do not submerge.
3. When hanging reel models on ceiling:
-By Hook: Close hook with pliers to prevent reel from coming down.
-By Bracket Pin: With reel in place, bend end of “L” shaped pin to prevent pin
falling out.
-Read mounting instructions carefully before installing.
4. Use in covered areas out of rain and weather.
5. Do not use in applications where liquid can run into or find its way into the face of
the LED lamp.
MOUNTING INSTRUCTIONS FOR MODELS WITH REEL
1. Select location within 2 feet of an electrical
outlet.
2. Attach U shaped bracket “A” to solid part of
the wall or ceiling using screws (provided).
3. Place hanger bracket “B” inside U shaped
bracket “A” lining up small holes in brackets.
4. Insert locking pin “C” through lined-up holes.
Be sure to bend the end of locking pin as
shown.
1. Select location within 2 feet of an electrical
outlet.
2. Screw the hanger hook securely into the
ceiling. Hook must screw into wood frame
behind drywall.
3. Hang reel on hook.
4. Close hook with pliers to prevent reel from
coming off. Refer to point “A”.
5. Adjust cord stop so light or outlet hangs at
desired length when cord is retracted.
OPERATION & MAINTENANCE
1. Connect the unit to a 12 VDC power source.
2. Disconnect the power supply before servicing.
3. Keep the unit free from grease and dirt by using a damp cloth with mild detergent
or waterless hand cleaner.
4. Do not use solvents such as gasoline to clean unit or cord as it makes the parts
brittle.
5. Caution: Do not look at UV lamp for extended period. Always wear UV protective
glasses when using light.
OPTIONAL WALL
OR CEILING
MOUNT
INSTALLATION
CEILING
MOUNT
360º ROTATION
Close
Hook
Cord
Stop
C
A
B
