10/45
Connection Kit:
o
Power cable to connect modules and BMM (see drawing on Appendix III):
Figure 3: Power cable connection for 9 modules battery
o
Communication ribbon cables kit to connect modules and BMM:
Figure 4: Communication ribbon cables
1 CDROM or USB key with SAFT diagnostic software (DiagWinBMS) and its
User Manual
It is advised to save the original packaging for reuse in case of later shipment.
Termination connection:
P/N 771611
- 1 per battery
(see drawing on Appendix IV)
Inter-module connection:
P/N 771596
- 8 for 532V battery
(see drawing on Appendix V)
Module to BMM
connection:
P/N 772872
- 1 per battery
(see drawing on Appendix VI)