Safran MorphoAccess SIGMA Series Скачать руководство пользователя страница 365

Страница: 365 / 517

MorphoAccess® SIGMA Series - Administrator Guide

Access Control by Authentication

2017_2000025464-v03

This document and the information therein are the property of Morpho. They must not

be copied or communicated to a third party without the prior authorization of Morpho

365

July 17

Automatic bypass of biometric control

The MorphoAccess® SIGMA Family terminal offers an authentication mode which depends on
the content of the user’s ‘card’.

The terminal searches the user card for data to ascertain if biometric control is mandatory or
not.

This authentication mode is described in section “Authentication process specified by User's
card”.

Result of access control check

The result of the access control check is notified to the user by audible and visible signals, as
described in the “Terminal User Interface”.

Compatibility with Access Control Systems

When the identification mode is activated, the MorphoAccess® SIGMA Family terminal supports
the optional features listed below:



internal relay activation when the access is granted, as described in “Internal Relay
activation on Access Granted result” section,



external activation of the internal relay, as described in “External activation of the
internal relay” section,



send access control result message to a distant system, as described in “Sending an
Access Control Result Message” section

Содержание MorphoAccess SIGMA Series





































































































































































































































































































































































































































































































































Результаты поиска

Содержание MorphoAccess SIGMA Series

Отзывы:

Safran MorphoAccess SIGMA Series, Руководство администратора, Страница: 365 / 517

Результаты поиска

Содержание MorphoAccess SIGMA Series

Отзывы: