Safran MorphoAccess SIGMA Series Скачать руководство пользователя страница 471 | Manualshive

Страница: 471 / 517

Safran MorphoAccess SIGMA Series Скачать руководство пользователя страница 471

MorphoAccess® SIGMA Series - Administrator Guide

Compatibility with an Access Control System

2017_2000025464-v03

This document and the information therein are the property of Morpho. They must not

be copied or communicated to a third party without the prior authorization of Morpho

471

July 17

Sending an Access Control Result Message

Presentation

The administrator can configure the MorphoAccess® SIGMA Family terminal to send a message
which contains the result of the access control, to a distant terminal. It can send the access
control result using different channels and different protocols. The administrator can configure
the protocol and channel of communicating the access control result.

This message can be used for different actions, depending on the role of the receiver in the
access control system: simple logging of access requests (no response expected), or performing
additional checks on access rights (expected response: access authorized or denied).

Figure 358:

Sending access control result message to a distant system

Ports and protocols

The MorphoAccess® SIGMA Family terminal is able to send the access control result messages
to a distant system, using the following ports and protocols:



Serial Port: Wiegand or Clock & Data or RS485 or RS422.



Ethernet or Wi-Fi™ link: UDP or TCP or SSL.

This is detailed in the sections that follow.

Please refer to MorphoAccess® 5G Series – Remote Message Specification for more
information about the format and the protocol used for sending the access control result
messages.

Serial Port

Ethernet or Wi-Fi™

«
...
469
470
471
472
473
...
»

Содержание MorphoAccess SIGMA Series






































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов