MorphoAccess® SIGMA Series - Administrator Guide
Access Control
2017_2000025464-v03
This document and the information therein are the property of Morpho. They must not
be copied or communicated to a third party without the prior authorization of Morpho
353
July 17
Access Control Result
Information for the User
The MorphoAccess® SIGMA Family terminal communicates the result of the access right check
by a local audible and visible signal. These signals are described in the “Audio Man Machine
Interface” section.
For example:
when the access is granted, the terminal emits a high pitched note,
when the access is denied, the terminal emits a low pitched note.
Information for the Administrator
The MorphoAccess® SIGMA Family terminal creates a record for each access request, in an
internal log file. Each record contains the date and the time, the user’s identifier (if available),
and the result of the local access control check.
This feature is described in the “Access Request Result Log File” section.
Integration in an Access Control System
At the end of the access rights control, the MorphoAccess® SIGMA Family terminal is able to:
Send a message, with data related to the access request. This feature is described in the
“
Sending the access control result message
” section,
Activate an internal relay (if the access is granted to the user), as described in “Internal
Relay activation on Access Granted result” section.
The format of the messages (which includes the user’s identifier) that is sent to the distant
system is described in the
MorphoAccess® 5G Series – Remote Message Specification
document.