Safran 4G V-Station, Быстрый старт

Страница: 12 / 37

QUICK START GUIDE 11
S
T
E
P
T
W
O
:
W
IR
IN
G
Mounting Procedure.
1. Hold the mounting plate onto the wall in the desired location, trace the square hole that will be cut out, and mark the
mounting screw locations. Note that for the 4G V-Flex, the large square hole is at the bottom and for the 4G V-Station the hole is
to the right.
2. Cut out the square hole with a jigsaw or drywall saw. If the 4G V-Flex device is to be recess-mounted, cut out a hole in the
drywall to accommodate the rear extension on the device housing.
3. Drill holes for the nylon wall anchors and install them.
4. Fish wires through the wall to the square hole.
5. Align the hole in the wall plate with the hole in the wall.
6. Fasten the mounting plate to the nylon wall anchors in the wall with the provided screws.
Mounting Plate Installation