Lock Battery Override Instructions – DeskLinc™
Pg. 4 of 6
Overriding Dead Lock Batteries with the LPI/ELPS (continued)
6. Connect the LPI/ELPS to the top of the handheld, be sure that
the battery pack is connected, and then press
ENTER
to
continue.
M254: Disconnect
Terminal Cables and
Connect LPI Probe
** PRESS ANY KEY **
7. Press
6
or use the
DOWN ARROW
(
▼
) key to move the cursor
to “6. Open With ELPS Key.” Then press
ENTER
.
S003: PROGRAM MENU 1
1.Program Lock
2.Update Lock Clock
3.Connect to Station
4.Lock Vers/LED Diag
6.Open With ELPS Key
8. At the M252 screen, connect the probe to the DeskLinc
handheld, plug in the battery, and then press
ENTER.
M252: Press Any Key
and THEN Insert LPI
Probe into Lock!
(Press esc to Abort)
•
For magstripe and smart locks, insert the LPI/ELPS device into
the lock’s card reader slot.
•
For RFID locks, plug in the probe’s USB cable to the port on the
lock.
9. The M251 screen will display until lock programming is
complete.
M251: Please Wait
Programming the Lock
10. As soon as the M236 screen appears, turn the lock’s handle to
open the door with the LPI/ELPS inserted.
M236:ELPS is powered
and the lock is open
Please turn handle
Press Any Key
© SAFLOK™, all rights reserved.
WL 4/21/2009
