5
4.2 System Installation
4.2.1 Camera Installation
1.
Fix camera’s holder by crew, install the camera (on wall or other support) in a proper height
(recommend height at approx.2m);
2.
Power supply with adapter (manufacturer supplied): AC 220V;
4.2.2 Blackbody Installation
1. Tripod Setting
Take off the adapter block from tripod;
Fix the adapter block on blackbody, then put it on the tripod;
Set the blackbody on the entrance of passenger way, height at approx. 2m;
Blackbody is powered by AC 220v.
2. You also can choose other installation ways according to actual situation;
4.2.3 Miscellaneous
1. Suggest distance between Thermal Imaging Camera and blackbody is 3~5m.
2. Suggest to set blackbody and Objects on one parallel side, to get the most accurate
measuring result the space between should be set to 1m~2m.
Figure 2 The system installation architecture example
