User Manual
V2.0 2017 Copyright SAFEWAZE ™
Swing Falls:
Prior to installation or use, make considerations for eliminating or
minimizing all swing fall hazards. Swing falls occur when the anchor is not directly
above the location where a fall occurs.Always work as close to in line with the anchor
point as possible. Swing falls significantly increase the likelihood of serious injury or
death in the even of a fall. (See Figure 2)
FALLSAFE USA
COMPATIBILITY OF CONNECTIONS
Connectors are compatible with connecting elements when they have been designed
to work together in such a way that their sizes and shapes do not cause their
gate mechanisms to inadvertently open regardless of how they become oriented.
Connectors (hooks, carabiners, and D-rings) must be capable of supporting at least
5,000 lbs. (22.2 kN). Connectors must be compatible with the anchorage or other
system components (see Figure 4). Do not use equipment that is not compatible. Non-
compatible connectors may unintentionally disengage (see Figure 3). Connectors must
be compatible in size, shape, and strength. Self-locking snap hooks and carabiners are
required by ANSI Z359 and OSHA guidelines. Contact SAFEWAZE™ if you have any
questions about compatibility.
FIGURE 3 - UNINTENTIONAL DISENGAGEMENT
Non-compliant part
3 - gate opens
2 - gate presses
against
non-complaint
part
4 - and parts disengage.
1 -
NOTE:
SOME SPECIALITY CONNECTORS HAVE ADDITIONAL REQUIREMENTS.
CONTACT SAFEWAZE™ WITH QUESTIONS.
FIGURE 2
Page 6
