User Manual
V1.7 2019 Copyright SafeWaze
Page 17
Maintenance
Any SafeWaze Kernmantle Rope Horizontal Lifeline components requiring
maintenance must be tagged “unusable” and removed from service.
Cleaning maintenance may be performed by the user.
Repairs to the product may only be made by the manufacturer or entities authorized in
writing by the manufacturer.
THIS SYSTEM MUST BE INSPECTED BY A TRAINED COMPETENT INDIVIDUAL OR
SAFEWAZE!
NEVER ATTEMPT TO SERVICE THIS UNIT OR TAMPER WITH ITS FUNCTION IN ANY WAY!
Storage
When not installed, the SafeWaze Horizontal Lifeline should be stored in a cool, dry
place out of direct sunlight. Do not store in areas where damage from environmental
factors such as heat, light, excessive moisture, oil, chemicals and their vapors, or other
degrading elements may be present. Do not store damaged equipment or equipment
in need of maintenance in the same area as product approved for use. Equipment that
has been stored for an extended period must be inspected as described in these User
Instructions prior to use.
11.0 Inspection and Maintenance
Inspection
Inspect the device for corrosion and/or damage.
Check the Housing Plates for signs of distortion.
Inspect both the webbing of Cross Arm Straps (if being used) and Rope for cuts,
abrasions and contamination.
Check carabiners for proper operation, signs of corrosion, distortion or damage.
Frequency
All components of the SafeWaze Kernmantle Rope Horizontal Lifeline must be
inspected prior to each use, and annually by a “competent person” (other than the
user), as defined by OSHA.
Criteria
If inspection reveals any defect, inadequate maintenance, or unsafe condition, remove
from service until a “qualified person” as defined by OSHA 1926.32(m) can determine
the need for authorized repair or disposal.