SafetySpeed C4 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 43

SafetySpeed C4 Скачать руководство пользователя страница 2

2

A message from all of us at SAFETY SPEED MANUFACTURING:

Thank you for purchasing a Safety Speed vertical panel saw or router. We take pride in building these fine
products in the U.S.A.

Each SSC product is designed to give years of dependable service. Our saws and routers are built from the finest
components we can specify, and every machine is individually assembled by our employees



some of whom

have been building these products for more than 25 years. We appreciate your choosing our products for your
application.

The employees of Safety Speed

Ham Lake, Minnesota

Warranty

Safety  Speed  (SSC)  warrants  the parts and workmanship of this tool, except for the electric motor, for
one  year from the date of manufacture.  SSC will repair or replace, at our cost, any component that is
determined to be defective.  Such repair or replacement is limited to providing satisfactory replacement
parts from the factory.  SSC assumes no responsibility for making repairs on site.  Any parts returned to
the factory must be returned freight prepaid.

All saw and router motors are warranted directly by the manufacturer.  See local repair and maintenance
centers for warranty claims for motors.

Safety Speed assumes no responsibility for any damage or accidents resulting from the misuse of this
tool,  its  misapplication,  or  failure  to  follow  precautionary  safety  measures.    SSC  assumes  no
responsibility for any consequential damage or loss of production.  SSC will not be responsible for claims
made  for  machines  that  are  not  used  or  maintained  in  the  normal  course  of  business,  used  for
applications not intended, or modified in any way.

This manual covers the following SSC panel saw models:

C4

H6

7400

C5

6400(P5)

7400XL

H4

6800(P6)

H5

the following router models:

3400

TR2

and the following saw/router combination machines:

SR5

SR5U

«
1
2
3
4
...
»

Содержание C4












































Отзывы:

Нет отзывов