www.safetyxpress.com.au
PRODUCT INFORMATION &
INSTALLATION GUIDE
1300 049 246
Specifications
SKU
BOLSM114SS
Material
304 Grade
Stainless Steel
Colour
Silver brushed body
Dimensions:
Height:
1000mm
Diameter:
114mm (Pole) 200mm (Base)
Wall Thickness:
3mm
Base:
4 Mounting Holes
16mm each in Diameter
Item Weight
10kg
Fixings
4 x FREE Mounting Bolts Included
per bollard (standard fixings kit)
Surface Mount Bollard
Installation:
1. Read all instruction steps from beginning to
end.
2. Determine exactly where the bollard will be
placed. If you are installing more than one
bollard, it is a good idea to mark the ground to
ensure that you have a straight line to assist you
with the correct placement of your bollards.
3. Using your hammer drill, drill a guide hole in the
surface, through each hole in the bollard using
the drill bit. (This is to mark the surface so that
you know where to continue to drill).
Tools Required:
• Hammer drill with 14mm drill bit for M10
coach screw 100mm, or 10mm drill bit
for M10 concrete screw anchors
• Fixing kit (M10 coach screws 100mm, or
60mm M10 concrete screw anchors, or
100mm M10 concrete screw anchors)
• The correct sized socket
• A hammer
• A hand broom or industrial vacuum
4.Remove the bollard and brush or vacuum away the
dust.
5. Continue to drill each guide hole to almost the
entire length of your fixings.
6. If you are using a plastic plug component, put it in
the drilled hole and hammer in.
7. Place the bollard over the holes, line up and place
your fixing in the holes and screw or hammer in.
8. Use your socket to tighten the screw if applicable.
Be careful not to over tighten.
FREE
Fixings
22
MONTHS
MONTHS
304
Grade