Safety Vision SV-LCD70RP, Руководство пользователя

Страница: 12 / 16

12
Appendix C
Troubleshooting
This section provides troubleshooting guidelines for certain operational prob-
lems you might encounter using the SV-LCD70RP monitor. Before requesting
service, check the following.
Ensure that the power supply and ground wires are connected properly. •
Ensure that the video extension cable and video input cable are •
connected properly to the inline control box.
Confirm all buttons are illuminating. (A red POWER light indicates that •
the monitor is on or standby but other buttons are green when camera
signals are detected. If the buttons are not illuminating, it means the
monitor is not receiving a signal from any connected cameras.)
For additional troubleshooting guidelines, contact Safety Vision Technical
Support at 713.896.6600 or 800.880.8855. Additional technical support is
available on the Safety Vision website: www.safetyvision.com.
Appendix D
Troubleshooting
Safety Vision, L.P. (“SV”) makes the following limited warranty, which is effec-
tive at the time of the original end-user purchase.
SV warrants this product against defects in materials for a period of one year
after the date of purchase. During this period, SV will repair or replace a defec-
tive product or part without charge to the customer. The customer must send
the defective product or part to SV or an authorized SV dealer. The customer
must pay for all transportation and insurance charges for sending the unit to
be repaired. SV’s total liability is limited to the original product cost.
NOTE: Optional warranty products are available for all SV products
and may be purchased at the time of the original end-user purchase or
any time during the original Limited One-Year New Product Warranty
period. Contact the Safety Vision Warranty department at 800.880.8855,
or visit the Safety Vision website at www.safetyvision.com for more
information.