ROADRECORDER 8400 NVR USER GUIDE
8
Storage Media
Hard Drive Canister
Use the following procedure to remove the hard
drive.
To remove the hard drive from the NVR:
1.
Ensure the NVR is powered off.
2.
Insert the key into the hard drive lock and
turn it clockwise.
3.
Turn the two hard drive thumb screws
counter-clockwise until they are loose.
4.
Pull the hard drive firmly straight out.
Once removed, the hard drive can be read
with the hard drive reader connected to a PC.
The computer recognizes the hard drive as an
external storage device.
User the following procedures to reinsert the
hard drive:
1.
Push the hard drive firmly all the way into
the NVR.
2.
Turn the two hard drive thumb screws
clockwise until they are secure.
Do not over-tighten the thumb screws. Use
finger pressure only!
3.
Insert the key into the hard drive lock and
turn it ounter-clockwise.
Содержание ROADRECORDER 8400 NVR
Страница 1: ...ROADRECORDER 8400 NVR USER GUIDE...
Страница 25: ...23 ROADRECORDER 8400 NVR USER GUIDE Appendix B Dimensions...
