To remove the hard drive canister from the NVR
1.
Ensure the NVR is powered OFF.
2.
Insert the key into the hard drive canister lock and turn it clockwise.
3.
Turn the two hard drive canister thumb screws counterclockwise until they are loose.
4.
Pull the hard drive firmly and straight out.
To reinsert the hard drive canister into the NVR
1.
Push the hard drive firmly all the way into the NVR.
2.
Turn the two hard drive canister thumb screws clockwise until they are secure.
Do not over-tighten the thumb screws. Use finger pressure only!
3.
Insert the key into the hard drive canister lock and turn it counterclockwise.
Removing / Inserting the Hard Drive Canister
OBSERVER
™
4816 HVR HARDWARE USER GUIDE
8
