LED7B-TQ / LED10B-TQ USER GUIDE
30
Auto Scan
Auto Scan
is a continuous rotation of up to seven camera layouts. To set Auto
Scan parameters,
1.
In the Settings Menu, tap the
Auto Scan
icon to display the following
menu:
•
Tap a
Display
icon to select a different camera layout.
•
Tap a
Delay
icon to adjust the amount of time the camera feed displays
(0 to 60 seconds)
before the rotation proceeds to the next camera feed.
NOTE:
◦
If users adjust Display or Delay parameters during a rotation, changes
will take effect after the current rotation completes.
◦
Users may skip a camera layout in the rotation by setting the Delay to 0.
•
Toggle Enable
On
/
Off
to begin or end continuous rotation.
An Auto Scan rotation interruption will occur in the following cases:
•
If a trigger occurs, the priority camera feed will display
(see the
.
•
If the Main Menu opens, the displayed camera feed will freeze until the
Main Menu closes.
2.
To exit, tap the
icon.
Содержание LED7B-TQ
Страница 1: ...U S E R G U I D E LED7B TQ LED10B TQ...
