Safety Vision 9000-NVR, Руководство пользователя

Страница: 4 / 25

ROADRECORDER® 9000 USER GUIDE 2
1 System Status LEDs:
• HDD
◦
BLINKS – When there is Reading and Writing Activity.
◦
SOLID –
When there is HDD fault active.
• ACC
◦
SOLID – Powers on when the ignition is turned on.
• UPS
◦
SOLID – Powers on when the main power is lost, and
the NVR is powered by internal backup power supply.
• WWAN
◦
SOLID – Will remain off by default. Only turns on
when a cellular modem is installed within the NVR.
2 LAN 2:
• 8-pin A-Code M12 Gigabit Network Interface Controller
(NIC) .
• Interface with external WIFI / Cellular Routing Device.
3 PoE 1 – PoE 8:
• 8-pin A-Code M12 Gigabit Power over Ethernet (PoE) NIC.
• Type 2 Class 4 PoE (25.5-Watt 53VDC) .
4 GPS Antenna Input:
• Connection for external GPS antenna.
5 Hard Drive Canister:
• 2 x 2.5” SATA SSD with tamper proof drive case locks.
Requires key to remove drive canister.
6 WIFI 1 / WIFI 2 Antenna Inputs – 2.4 GHz / 5.0 GHz:
• 802.11ac, up to 867 Mbps speeds 5.0 GHz | 144 Mbps
2.4 GHz.
PART 1: HARDWARE
Components
Front Panel