Safety Vision 48 Series, Руководство пользователя

Страница: 9 / 24

48 SERIES IP CAMERA 7
Memory Card
The 48 series IP cameras supports microSD card for local storage. Use the
following procedure to mount the memory card.
1. Remove camera dome cover.
Using a T15 TORX™, loosen the 4 locking screws and remove
dome cover.
2. Release microSD card.
Lightly push down on the microSD card until a “click” is felt, then allow it
to spring out of the slot.
3. The microSD card partly ejects.
4. Pull the microSD card straight out.
Reinsert the microSD card in the same manner: push card straight in until a “click”
is felt, then release.
NOTE:
Press the Reset Button for approximately 10 seconds while the camera is
powering on to restore the default settings.