5
Monitor Installation
Step 1 Find a safe suitable location for mounting the
monitor. Make sure it does not interfere with the opera-
tor’s view. Mark the three holes in the u bracket (1) where
the monitor will be permanently fastened. Drill three pilot
holes for the bracket. Remove the bracket hinge bolts (11)
and the hand tension knobs (12) fasten the U-bracket to
the marked/drill location with three mounting screws. If a
stronger mounting is need or preferred, use three
stainless steel bolts, lock washers and hex nuts. Contact
customer service for ordering.
Step 2 Place the monitor back on the bracket using the
two hinge bolts and the two tension knobs. Do Not
tighten. Hand tight enough to allow free movement of the
monitor. Adjust the monitor up to 30 degrees forward and
up to 30 degrees backwards and than hand tight the
knobs so the monitor does not allow movement.
See illustration below.
