Safety Clamps VL-BC, Руководство по эксплуатации, техническому обслуживанию и ремонту

Страница: 3 / 16

Safety Clamps, Inc.
VL-BC
, VBC
Model
s
1
GENERAL INFORMATION
1.
Always choose the proper clamp and rated capacity for the
material to be lifted.
2.
The VL-BC model
and VBC model
Safety Clamp
s are
designed for lifting and stacking of beams and structural
shapes.
3. The VL-BC and VBC model s are capable of lifting,
transferring, and stacking of steel beams in the “H” position
when lifting eye is over the web and between the flanges
(Fig. 2).
4. The VL-BC model incorporates “lock open” and “lock close”
features.
The VBC model is a non-locking clamp.
5.
Never use the VL-BC model
or VBC model
to lift plate
material. The VL-BC model and VBC model are designed to
lift beam and channel.
6. Make sure that the load to be lifted is properly balanced.
7. Visual inspections should be conducted before and after
each use. Monthly inspections should be conducted by
disassembling the clamp and thoroughly checking each part.
8.
Always store the
model VL-BC
clamp in the “lock open”
position.