PRODUCT MANUAL
Mi9 Mini Voice Recorder : SB-VR9100
Page 9
www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524
SET THE DATE AND TIME
You’ll first want to set the Date and Time for your Mi9. Remember, your Date and Time
will RESET when you turn OFF the Main Power Switch. So after you turn the main switch
to ON, dont turn it off unless you are done using the device for a while, otherwise just
charge it when it runs out of juice. Remember it turns itself off after being idle for a while
and you turn it back on by pressing and holding the PLAY button. Dont turn the main
switch OFF.
Button presses are shown in
RED
.
Default screen is at
RECORDINGS.
But if you are not there just use the NEXT or
PREVIOUS buttons to move between modes. For this page move to the
SET
mode:
1. PLAY
to get to SET mode options.
2. NEXT/PREV
to choose DATE AND TIME.
3. PLAY
to enter the DAte and Time settings.
4. PLAY
to enter SET TIME option.
5. PREV/NEXT
to change hour.
6. MENU
to move to Minutes.
7. PREV/NEXT
to change minutes.
8. PLAY
to return to SET TIME option
9. NEXT
to move to DATE SETTING.
10. PLAY
to Confirm and go to sub options for date settings
11. PLAY
to select date format
12. NEXT
to choose MM DD YYYY (or whatever format you want)
13. PLAY
14. NEXT
to go to SET DATE
15. 15.
PLAY
to select SET DATE
16. PREV/NEXT
to change numbers then
MENU
to move to next set of numbers
17. after changing date corectly press
PLAY
to return to SET TIME
18. Press
MENU
to go back out of menu options
19. You are done changing time and date
Your Date and Time is now set.
REMEMBER:
1. At any point while you are setting up your recorder, use the MENU button to go back one level.
2. If your recorder turns off HOLD the PLAY button to turn it back on.
3. After you have done your settings, dont turn it off using switch on side. Either let it turn off by
itself or press and hold the PLAY button to turn it off. This way you wont lose your settings. Turn-
ing unit off via ON/OFF switch will also make you lose all your custom settings and you will have
to reset!
