Page 8
PRODUCT MANUAL
NY Yankee Hat Video Recorder
www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524
VIDEO RECORDING
Don’t forget system switch must be in ON position before starting/using remote controller!
1. Slide remote cover down to expose buttons. Press and hold A button until red indicator light
turns on. Release button. Hat will also vibrate continuously for about 2 seconds and stop. You are
now in standby mode.
PLEASE NOTE:
The purpose of the vibrate function is to allow you to know what the hat
is doing when it is on your head since you will not be able to see the indicator light at that
point. So once you know the types of vibrations, you will know what the hat is up to when you
press the buttons on the remote controller!
4. To begin video recording, press (firmly) and release B button. Your hat will vibrate
1 time
and
stop (if you are looking at the indicator light, it will blink twice and turn off). Your hat is now
recording HD video.
4a. If you want to turn on video recording in MOTION DETECTION mode, use the D button
instead of the B button. The same vibration and lighting will occur. the only difference is that
recording will begin only if there is movement in the camera purview. Otherwise nothing will
record.
5. To stop recording, press same B button (or D button if in motion detection mode) on remote
once (firmly) and release. Hat will
vibrate 2 times
. Your recording has now been stopped and
saved, and indicator light has returned to steady blue.
