4
back to maximum range and this icon will appear.
If you are using two Bracelets when setting the distance, ensure you only turn one Bracelet ON
(the other Bracelet should be turned off). After the distance setting is complete, both Bracelets
have the same proximity distance from the Base Unit.
IV Notices
1.
Base Unit low battery WARNING
: Whenever the battery is running low on the Base Unit, you
will hear ‘3 Beeps’, at the same time there is a bolt icon
will flash in the LCD. The New
Safety Angel Unit CANNOT be used again, please recharge the battery or connect to mains power
via the adapter.
2
Bracelet low battery WARNING
: Whenever the internal rechargeable battery of the Bracelet is
running low, the LED on the Bracelet front will flash (Red) 3 times in 7 second increments, New
Safety Angel CANNOT be used and the Bracelet battery must be recharged. (see section V 2)
When the batteries’ charge is low, the Bracelets signal cannot be received by the Base Unit, The
Base Unit will sound an alarm.
3.
Multiple Bracelets
: One Base Unit can work with a maximum of two Bracelets. Each Bracelet
must be “paired” with the Base Unit (see section III
3). If you have one Base Unit with two
Bracelets, make sure the Bracelets have different numbers. (please check the number on the rear of
the Bracelet,
①
,
②
.)
4.
To stop the alarm after activation
: Press the Reset button, the unit will return to activated
mode - Or switch the Base Unit OFF, it will stop working.
5.
To turn the Base Unit OFF
: Switch the On-Off button to Off.
6.
Drying the Bracelet
: When testing the Bracelet in water, it will keep alarming if the Bracelet is
not dry. While holding the Bracelet, swing it from side to side, the water remaining in the Bracelet
should dissipate.
7.
Use as a Pet Safety Alarm
: The New Safety Angel Unit can also be used in water Immersion
mode by attaching the Bracelet to a neck of the pet or collar.
