1
2
22
21
C. Basic Use
C-6
Accessories on Select Models
Cup Holder
Pull pad off corner. Hook bottom
of cup holder to edge of shell.
Rotate cup holder up until it
snaps into the hole on the shell.
Replace pad.
Cup holder can be on either side.
C-5
Reclining Child Restraint
Rear Facing -
1
Must be
fully reclined.
Forward Facing -
2
Must
be upright.
Upright
Rotate recline stand out
and push upward to lock in
position.
To Recline
Pull recline stand down and
rotate under child restraint.
Remove Harness Strap
Loops from Splitter Plate
Fully loosen harness strap.
Locate splitter plate on the
back of the child restraint
and remove the harness
strap loops from splitter
plate as shown.
1.
PUSH
Remove Harness
Strap
Pull harness through the
slots from the front
(1)
.
Unthread harness from
the chest clip
(2)
.
Unthread harness from
the buckle tongues
(3)
.
Pull harness out of shell
(4)
.
2.
C-7
Removing Harness System
1
2
3
4
Remove Buckle
Flip the child restraint over
and locate buckle’s metal
retainer.
3.
continued on next page.
Only remove the harness system to clean seat pad or when
changing child restraint to a booster seat.
Body Pillows
To remove body pillows, slide
out from behind the harness
strap.
