sewn
end
sewn
end
Harness System Adjustments
for Smaller Infants
11
sewn
end
sewn
end
12
From Top of Car Seat,
Lay Metal Retainer Flat
Against Shell As Shown
Fully Loosen Harness Straps
From Back of Car Seat,
Remove Harness Strap
Loops From Splitter Plate
sewn
end
sewn
end
4
1
2
Adjusting Harness Strap Length
Replace Pad and Check Buckle
Pull up on the buckle to make sure it
is secured.
The buckle
must
not
pull out.
5
If you cannot achieve a snug harness fit for your child,
you may need to adjust the buckle strap and/or the
harness strap length as shown in this section.
With Buckle in 1st Slot,
Turn Car Seat Over
If you need to move the buckle to
the 1st slot, see pages 9-10.
Pull Up Front of Car Seat Pad
Pull Buckle’s Metal Retainer
Towards You, Then Push It up
into Middle Buckle Slot As
Shown
sewn
end
2
1
3
Adjusting Buckle Strap Length
continued on next page
