Vehicle Belt Installation
52
2.
Place Child Restraint
Forward Facing
Flush Against
Vehicle Seat Back
1.
Rotate Recline Stand
Out and Push Upward
to Lock
WARNINGS:
Do not use the
lower anchor belt along with the
vehicle lap or lap/shoulder belt.
Secure the lower anchor hooks to
storage attachments as shown
when installing with vehicle belts.
Check the vehicle belt before each use. Use only if
the belt can be tightened properly and securely.
Failure to follow these warnings can result in serious
injury or death.
51
continued on next page
To Release Lower
Anchor Belt
Remove child from child restraint.
Remove tension from the lower an-
chor belt by pushing down on side of
child restraint with the lower anchor
belt adjuster. Then press the adjuster
button to loosen belt.
Unhook from anchor by squeezing
spring lever on hook, pushing hook
back into the seat bight, and twisting.
Then pull it out of the vehicle seat.
Store lower anchor belt when not
in use. See page 27.
10.
Check Belt Tightness
Hold child restraint at the belt
path with your weakest hand.
Push and pull from side to side.
It should not move more than
1 in. (2.5 cm).
If it moves more than 1 in. (2.5 cm),
you can try:
A.
Putting your knee in the seat and pulling the belt tighter.
B.
Reinstalling the child restraint.
C.
Changing to
a different seating location.
D.
Switching to vehicle belt installation.
