To use
Optional: Using the swing stops
Gate will swing both ways
unless one of the swing stops is
down. Gate will not swing at all
if both swing stops are down.
7
4
Install wall cups
4g
Remove paper
from adhesive.
Adhere to outside
of wall cup.
Remove paper
from other side.
• Wall cups MUST be installed for maximum safety.
• DO NOT
remove adhesive until step
4f
.
•
Install gate centered in opening and flush to floor.
4f
4h
For best results,
allow to cure for
24 hours.
Use pencil to mark
around the wall cups.
Remove gate.
Place wall cup onto
each bumper.
4b
USA
4e
4d
Fit gate loosely into
opening, flush to the
floor where it will be
installed.
Tighten pressure bumpers
until gate is in place and
aligned with latch.
4a
Align 4 wall cups
to pencil marks
and press for 30
seconds.
Lay out all parts
1
Contemporary
Tall-and-Wide
Gate
BOTTOM
TOP
Age: 6 to 24 months.
Adult assembly required.
©2023 Dorel Juvenile Group, Inc. Safety 1st™ and the Safety 1st logo and design are trademarks
of Dorel Juvenile Group, Inc. (800) 544-1108 www.safety1st.com. Styles and colors may
vary. Los estilos y los colores pueden variar. Made in VIETNAM. Hecho en VIETNAM.
Distributed by (distribuido por) Dorel Juvenile Group, Inc., 2525 State St., Columbus, IN
47201-7494. Dorel Juvenile Canada, 2233 Argentia Road, Suite 110, Mississauga,
ON L5N 2X7. Importado y Distribuido en Chile por: Comercial e Industrial Silfa
S.A. - San Ignacio 0201 / Parque Industrial Portezuelo Quilicura, Santiago Chile.
Fono (562) 2339 9000. En Perú por: Comexa S.A. - Los Libertadores 455 –
San Isidro, Lima – Perú. Fono (511) 4469014. En Centro América, Caribe
y Ecuador por: Best Brands Group S.A. – Av. Balboa, Bay Mall Plaza, Planta Baja, local 9, Panamá. - Fono:
(507) 300 2884. En Colombia por: Baby Universe S.A.S. - Vía 40 No. 77-29, Barranquilla, Colombia - Fono:
(575) 353 1110 Importador: DJGM, S.A. DE C.V. Gabriel Mancera No. 1041 Col. Del Valle, Benito Juárez C.P.
03100 México, Ciudad de México R.F.C. DJG140305GN9 Tel. (55) 67199202 01/03/23 4358-8373
Check and re-check the indicator
Be sure to re-check the indicator regularly
and re-tighten the bolts if you see any
red when gate is closed. Any red showing
indicates the gate is unlatched.
USA
Red
6
Install in doorway
TIP:
Think about
which side you’ll want
the handle on during
daily use when you
position the gate.
Position gate in wall
cups. Hand tighten top
and bottom pressure
bumpers until gate is
firmly in place.
5
• Remove all contents from packaging and discard box, and/or
poly bags.
• Lay out all parts.
• Do not return this product to the place of purchase. To address
any issues or for helpful information on assembly/installation or
use, please visit us at www.safety1st.com to chat with us there.
You can also text us at (812) 652-2525 or call Consumer Care
at (800) 544-1108. Have ready the model number (GA205) and
date code (manufacture date) located on inside of gate panel.
A
B
B
A
Raise swing stops and open gate
Parts List:
Basic Gate (2 pieces)
#10 x 0.375” Phillips head screw (1)
Small Extensions (1)
Medium Extensions (2)
Top Extension Caps (2)
Bottom Extension Caps (2)
Pressure Bumpers (4)
Wall Cups (4)
Adhesive Pads (4)
Tools Needed (not included):
• Phillips head screwdriver
• Measuring tape
• Pencil
A
B
WARNING:
Children have died or been seriously injured when gates are not securely installed.
•
TO PREVENT FALLS, NEVER use pressure installed gate at top of stairs.
•
ALWAYS
install and use gates as directed using all required parts.
•
STOP
using when a child can climb over or dislodge the gate.
•
NEVER
use to keep child away from pool.
•
Discontinue use of the gate if it becomes damaged, broken, or disassembled.
•
Intended for use with children from 6 months through 24 months.
•
ALWAYS
install as close to the floor as possible.
•
For bottom of the stairs use, place gate on lowest stair from the bottom.
•
This product will not necessarily prevent all accidents.
NEVER
leave child
unattended.
•
Keep small parts away from children during assembly.
Read all instructions before assembly and use of product. Keep instructions for future use.
CAUTION:
•
ALWAYS
check regularly to ensure gate and locking systems are secure. Tighten
locking hardware as necessary.
DO NOT
over-tighten.
•
DO NOT
use gate if any parts are missing or broken. Contact Dorel Juvenile Group for
replacement parts and instructional literature if needed.
•
DO NOT
substitute parts or try to modify the product in any way. Parts not provided
and approved by Dorel Juvenile Group may result in an unsafe product.
Care and Maintenance:
DO NOT
immerse in water. Wipe with a
damp cloth and dry.
You MUST install wall cups to keep the gate in
place. Without wall cups, child can push out and
escape.
WARNING:
GA205
4c
min 29” - max 47”
Use
1
SMALL
and
2
MEDIUM
extensions,
Go to steps
2a
–
2f
Use
2
MEDIUM
extensions,
Go to steps
2a
and
2c
–
2d
Use
1
SMALL
and
1
MEDIUM
extension,
Go to steps
2a
–
2e
Use
1
SMALL
extension,
Go to steps
2a
–
2d
Use
1
MEDIUM
extension,
Go to steps
2a
and
2c
–
2d
Up to
47”
Up to
44”
Up to
41”
If Opening is...
If Opening is...
If Opening is...
Measure opening
Up to
35”
Up to
38”
If Opening is...
If Opening is...
If Opening is
up to
32”
,
no extensions are required. Do step
2a
, then go to step
3
.
2
Insert pressure bumpers
into 4 corners
3
x4
OK
NO
Repeat steps
2c
–
2d
with 1 MEDIUM extension
on the other side of the gate. Insert extension caps
ONLY IF you are not adding another extension to
this side.
IF you are using the SMALL extension, always add it to the gate
FIRST. Insert extension into gate. Insert extension caps ONLY IF
you are not adding another extension to this side.
TIP:
Use the bolt side of the
bumper to gently extract the
extension caps from the gate.
Assemble
SMALL
extension
Add extension
For openings over
38” - 44” only
Remove
extension
caps
TOP
BOTTOM
USA
USA
USA
BOTTOM
TOP
A
B
B
B
B
caps:
check!
Remove extension caps from
gate. Keep them near by;
you will need them for final
assembly.
2c
2d
2e
2b
MEDIUM
SMALL
U
S
MEDIUM
SMALL
Repeat step
2d
with final MEDIUM extension on
either side of the gate. Insert extension caps in all 4
corners.
For openings over
44” - 47” only
2f
USA
USA
USA
4
Assemble
gate
2a
