a.
Slide LATCH belt loop across the
“S” clip until it bunches up on “S”
clip and the top bar of “S” clip is
free from the LATCH belt loop.
b.
Slide LATCH belt loop back
across “S” clip until LATCH belt
loop is centered, making sure top
and bottom bar is on the outside
of the LATCH belt loop.
17
18
Do not use this car bed unless the infant is 5-20 lb (2.3-9
kg) and 26 in. (66 cm) or less.
Do not use additional padding in the head area or place
blankets near the infant’s face. aWatch the infant closely.
Never take your infant out of the car bed while the vehicle
is moving.
Never leave infant unattended.
Placing your infant in a hot car bed may result in burns.
Do not use a car bed with damaged or missing parts.
Do not use cut, frayed or damaged harnesses.
Do not substitute parts or try to modify the car bed in any
way.
Do not lubricate buckles and fasteners.
Do not use any car bed accessory except those approved
by Dorel Juvenile Group.
Never allow any child to play with this car bed; it is not a
toy.
Do not remove or cover up any of the warning labels or
other labels on the car bed.
Read all instructions for additional warnings.
On the side of the car bed there is a date of manufacture
label. Do not use this car bed more than 8 years after the
date of manufacture.
11.
Attach “S” clip to
LATCH Belt Loop
Insert 2 of the 3 bars on “S” clip
into the loop at the end of the
LATCH belt.
12.
Finished
Make sure all metal clips are
flush against the shell.
Store LATCH as shown
when not in use.
Car Bed Use
4358-6748 Dream Ride LATCH.indd 21-22
4358-6748 Dream Ride LATCH.indd 21-22
4/7/15 4:48 PM
4/7/15 4:48 PM
