14
Pull harness through the
harness guides from the
front.
11
Rethread harness into
new harness guide
location. Make sure
harness does not twist.
12
WARNING
!
Failure to reattach the harness correctly,
can result in serious injury or death.
13
Refasten harness to
splitter plate. Make sure
harness does not twist.
To change harness
location:
From the back of the seat,
remove harness from
splitter plate.
10
Harness covers help
provide comfort to the
neck. For harness covers
to fit correctly, you may
have to fit the upper ends
of the covers through the
harness slots. To remove
the harness covers,
unthread the harness from
splitter plate (see “To
Change Harness Location”
section). Slide covers off
harness and refasten
harness to splitter plate.
Harness Covers (on select models)
Infant Insert (on select models)
When using insert, make
sure insert does not cover
your infant’s face in any
way. Remove the insert for
older babies and toddlers.
To remove the insert,
unthread the harness from
splitter plate (see “To
Change Harness Location”
section) and pull harness
out from shell, remove
insert. Replace harness
guides, rethread harness
and reattach to splitter
plate.
15
4358-4548 Avenue 5/22/08 4:30 PM Page 17
