background image

21

22

Child Restraint and Booster Seat Use

Do not use a child restraint or booster seat that has been 
in a crash or a collision. The system must be replaced.
Do not use a child restraint or booster seat if you do not 
know the history of the restraint.
Never take your child out of the child restraint or booster 
seat or attend to the child’s needs while the vehicle is 
moving.
Never leave child unattended in the child restraint or 
booster seat.
To avoid the child being seriously burned, always check for 
hot seat and buckles before using this child restraint.
Do not use a child restraint or booster seat with missing or 
damaged parts.
Do not lubricate the buckles, harness system or fasteners 
for any reason. 
DJG does not recommend the use of accessories or add-
ons that have not been certifi ed with this child restraint 
and booster seat at original purchase date.
Never allow any child to play with this child restraint and 
booster seat; it is not a toy.
Do not remove the warning labels.
This child restraint has been certifi ed for use in passenger 
vehicles and aircraft. This booster seat has been certifi ed 
for use in passenger vehicles only. Do not use in a boat, 
on a motorcycle or in a cargo van or bus where there are 
no seat belts or tether anchors. Do not modify for use as a 
crib or a swing. Do not leave on stove top or any other hot 
surface.
On the back of the child restraint there is a date of manu-
facture label. Do not use this child restraint more than 10 
years after date of manufacture.
Read all instructions and warning labels for additional 
warnings.

Installation in Vehicle

Check the vehicle belt or UAS belt before each use. Use 
only if the belt is tightened properly and securely.
When unoccupied the rear-facing child restraint must be 
fi rmly secured to the vehicle with a lower universal an-
chorage system if available or with a vehicle seat belt. The 
tether strap must be stored as described in the instruction 
manual.
When unoccupied, the forward-facing child restraint must 
be fi rmly secured to the vehicle with a lower universal 
anchorage system if available or with a vehicle seat belt 
and the tether strap.
When unoccupied, the booster seat must be fi rmly secured 
to the vehicle with the vehicle’s seat belt only. The lower 
universal anchorage system and tether strap must be 
stored as described in the instruction manual.
In a crash or sudden stop, an unsecured child restraint or 
booster seat could injure the driver or other occupants in 
the vehicle.
Always check vehicle owner’s manual for proper use of ve-
hicle seat belts and the universal anchorage system (UAS) 
with your child restraint.
In very few vehicles, the child restraint and booster seat 
cannot be properly installed because of the type of seat 
belt system, airbag system and/or lack of location to 
anchor the tether strap. Always read and follow the vehicle 
owner’s manual instructions for child restraint use.

4358-6870 CAN Alpha Select ENG.indd   C21-C22

4358-6870 CAN Alpha Select ENG.indd   C21-C22

2/10/16   12:18 PM

2/10/16   12:18 PM

Содержание Alpha Select

































Отзывы: