IN064-01
S15-Angle Head Brazing Gun
Страница 1: ...IN064 01 S15 Angle Head Brazing Gun ...
Страница 2: ...tted in the gun SAFE No For brazing pin Mark 9211 8 9 5 mm A 9213 M8 threaded B 9215 M10 threaded C 9217 M12 threaded D Make sure that pin holder is tight to the gun Spanner 8mm and 10mm for 8 9 5 mm and M8 pin holders Two paces of spanner 10mm for M10 and M12 pin holders If the pinholder isn t tight a spark can destroy the axle The brazing pin should not go too loose in the pin holder when it doe...
Страница 3: ...mportant for the arc and energy amount Too high lift height increase the risk of a cold brazing too low lift height reduce the time and increase misfires B 5 1 Insert this end in to the gun B 5 2 Turn on the unit and Important Press the tool completely against the gun then pull the trigger Otherwise the gun may be damaged Important Hold the gun so the tool is horizontal B 5 3 The lift level is cal...
Страница 4: ...the upper small hole in the front of the gun IMPORTANT never adjust in the hole where the big plug is B 6 4 When lift height is too low Use the 3mm hexagon spanner and adjust the screw in the small hole anti clockwise about 1 4 of a turn then check with the instrument as in B 5 B 6 5 When lift height is too high Use the 3mm hexagon spanner and adjust the screw in the small hole clockwise about 1 4...
