background image

PAGE  

3

Start a covert conversation

Now make a phone call, you can talk with your partner via the
microphone build into the neckloop.

To answer a call simply tap the answer button.

** If earpiece detection equipment is in use, switch the unit off to
     prevent detection.

5

To be continued...

O

N

O

FF

Tape 

answer phone call

Microphone

TE 426

6

Battery and recharge

The neckloop has a built-in 230mah lithium rechargeable battery. The full performance of a new battery is achieved only after 
two or three complete charge and discharge cycles.  The battery can be charge and discharge hundred of times, but its will 
eventually wear out.

When recharge use only the supplied original default USB recharge cable and default wall charger.  Do not leave a full charged
device on recharge power source. Overcharging may shorten battery life. 

 

If left unused, a full charged battery will loss its 

charge over time.

We supply US/EU/UK standard plugs for the wall charger.  Please choose correct plug while placing the order.

FAQ of TE26:

Q. Why microphone not working, or can not hear audio in the earpiece?

A. Firstly check your earpiece, do you hear a hissing noise when the battery is inserted.  If so its likely the neckloop has a problem.
    If the jack fits your phone but you can not hear any audio, or the microphone failes to work you may need a different jack. 
    Please contact us in this situation.

Q. Why answer button no works?

A.  If the jack fits your phone but your cannot hear any audio, or the microphone failes to work you may need a different jack.
     Please contact us in this situation.

Q. How to recharge battery?

A. Please read “Battery and Recharge” step #5 for detailed instructions.. Once connected to power charger successfully, the 
    indicator will change to red.  You should find the indicator on the right side of the neckloop.

Q. Why I heard interference in the earpiece?

A. If earpiece has no quality problem, it is likely the volume is too loud. Use the volume control on the neckloop to adjust the
    volume to get clear sounds.

Amplified Phone Loop and Micro Headset Kit

Содержание MicroEars TE426

Страница 1: ...swer Button Volume Control Power Switch Inductive Neckloop Phone Jack Indicator PAGE 1 Power Adaptor Charger Cable Earpiece batteries 1 Wear Ear bud A Load battery into the earpiece Open the plastic earpiece box and press the sponge you will find the battery Cut the sponge and take it out Open the battery hook and make sure cathode face to handle and anode opposite to handle Then close the battery...

Страница 2: ...equire a different connection Even the jack is the same the audio and microphone connections might be different 2 Audio Sources Mobile phone mp3 ipad etc ON OFF TE 26 Neckloop Plug into audio port Wear the neckloop You can wear the neckloop on neck as shown in the image site down to drive sensitive earpieces including TE07 TE08P TE09 Power and volume control Once connected to your mobile phone mov...

Страница 3: ...plugs for the wall charger Please choose correct plug while placing the order FAQ of TE26 Q Why microphone not working or can not hear audio in the earpiece A Firstly check your earpiece do you hear a hissing noise when the battery is inserted If so its likely the neckloop has a problem If the jack fits your phone but you can not hear any audio or the microphone failes to work you may need a diffe...

Страница 4: ...f problems caused by wrong operations Thank you for reading and Happy eCommerce PAGE 4 TE426 Q How to avoid earpiece detector with this neckloop A Turn off the power switch to avoid earpiece detection equipment FAQ of Earpiece Q There is no sound from the earpiece A Please check if the battery is loaded correctly Q Why I can hear little static noise A It s normal to hear some static noise It means...

Отзывы: