INSTRUCTIONS – SAFETY, ASSEMBLY & OPERATION
PORTABLE STAIRS
ACCESSORIES
JOINING TRUSS
•
The truss attaches under the bottom stringers
allowing two stairs to be joined together end
to end.
•
Remove the base angle brackets on the upper
stair and mount them facing inwards on the inside
of the stringers.
•
Attach the upper stair to the lower one by fitting
M10 x 30mm bolts through the base brackets into
corresponding holes in the top step of the lower
stair. Tighten nyloc nuts firmly.
•
Fit the ‘C’ shaped brackets over the bottom stair
stringers spacing it evenly across the join between
the stairs. Tighten the nyloc nuts firmly.
•
Note; where the combination of two stairs
equals a total length greater than 15 steps and
the configuration is a clear span there must be
a central support post fitted under the stair to
ensure the SWL is maintained.
AdjustaStairs may be joined
for use on a batter or
embankment without the
need for the use of a truss.
6
00MM
W
IDE
A
DJUSTA
S
TAIRS
Mount the base angle
bracket facing inwards on
the inside of the stringers.
Attach the upper stair
by bolting the base
bracket to the top step
of the lower stair.
Fit the C shape bracket
to to the underside
of both stairs, evenly
spanning the two.
