5.3.2 Run “Safeshine Alert”, get into configure page, tap “del tag” and select “Yes”:
＝〉
Then, repeat the steps as normal pairing and connection.
Remarks
: If there are problems that “Safeshine Alert” could not get connection automatically
with SF13PB, which caused by turning off Bluetooth (e.g. flight mode), there is no need to re-pair,
just close the “Safeshine Alert” and restart it, then it will work normally.
5.4
Safeshine Alert software setting
Set the Link Loss Alarm Level of SF13PB and Apple device: Run "Safeshine Alert" , tap
"SF13PB", and select Configure, the alarm level can be set under this page .
＝＝〉
On Tag: High (Beep); Low (Beep); Off(None)
