Prepare the Device for Operation
Chapter 3. Configuration
22
Figure 3-2 Two Remote Ports on the Same Subnet
Routed Network
In a routed network, a router is placed between the initiating HA4000 #1 and the
WAN. Use the
ikeDefaultGateway
command on HA4000 #1 (see Figure 3-3) to
specify Router R2’s local router port IP address, 192.168.144.100. HA4000 #1
uses the router network to forward packets to its peer, HA4000 #2. At the
opposite end of the tunnel, HA4000 #2 specifies the Router R3 local access
port, 192.168.154.100, as the default gateway to use to forward packets to
HA4000 #1.
Figure 3-3 Router Between Two HA4000 Gateways
