5
VA4 2.01 EN
Configuration
Configuration
Reconfiguration and changes to previously recorded messages can
easily be made. SafeLine Pro can be downloaded for free on our
web site: www.safeline-group.com.
When recording and downloading own sounds.
A sound file name can be no longer than 59 characters. The sound
have to be in wav-format, mono with 16-bits resolution and 8 or 16
kHz sample frequency PCM. VA4 is normally delivered with 2048
KB Flash-memory this is enough for 240 sec of recording at 8 kHz
or 120 sec in 16 kHz. Both 8 and 16 kHz sampled *.wav-files can be
downloaded in the same VA4. If you have recordings in any other
resolutions or format they have to be converted first.
Inputs:
Standard configuration at delivery is:
Input 1-4, are Binary inputs 1,2,4,8.
Input 5-8 are fixed messages that are used for all floors like ”Doors
are closing”, ”Lift is overloaded”, ”Fire alarm” etc.
Configuration:
The inputs can be configured with SafeLine Pro:
Binary / Decimal / Gray code inputs for maximum 1-32 floors.
Fixed messages 1-8 can be selected.
Trigg signal: Floor message can be played when a trig input is acti-
vated, or when one of the inputs status are changed. All changes and
downloading of new messages have to be made from SafeLine Pro.
Polarity and voltage:
The input voltage can be b20-30 VDC.
If “Active 0 input” is activated a 0 VDC signal activates the input.
Supply voltage must be 20-30 VDC.
