9
012
34
567
89
VA4-SD v.2.01 EN
Configuration
Music
DIP switch 7 and 8 set the music mode, giving in total 4 different
modes.
1. (00) No music
2. (01) Music on
3. (10) Music on with reduction by input 7.
4. (11) Music on with reduction by input 7, and mute by input 6.
In modes 3, and 4, the background music is played while no other
message is played. All the fixed messages, arrival sounds and
floor announcements will interrupt (fade out) the music. After the
interrupting message is finished, the music will play again.
In modes 3 and 4, input 7 is used for reducing music level (whenever
music is played), and cannot be used as floor announcer/fixed
message.
In mode 4, input 6 is additional used as mute input. When input is
activated the current music sequence mute 100%, when deactivated
the next music file is played.
NOTE: In the music folder multiple music files can be placed, and
will be played in sequence. The current playing music file will be
remembered, and if interrupted by either mute or power failure, the
next music file will be played.
The binary coded decimal (BCD) 10 stage switch is used to set the
loudspeaker level. Both voice announcer (messages) and the music
level can be set by this switch.
NOTE:
• Stage 1 is lowest volume, stage 9 is highest volume. Stage 0 is used
for special purpose (future feature).
• If input 6 is used for “night music” or reduced music level, the level
will be approximately half of the level set by the audio level switch
(BCD switch).
Setting audio
volume
(loudspeaker)
