![background image](http://html2.mh-extra.com/html/safeline/sl1/sl1_manual_3313694013.webp)
13
13
SL1 v.2.1.0 EN
Configuration
unit numbers
To remotely program a parallel connected unit, the unit number
has to be pre-programmed. If units are connected in series (daisy
chain), unit numbers can be remotely programmed.
Start programming
00
Enter the password
*
0000
#
Unit number
*82*
n
#
Terminate programming
*00*#
Programming the unit number
Dial phone number.
First unit answers
Program unit as number 1
Hang up
Re-dial the phone number
Press the next unit
number repeatedly
until hearing 3 beeps
The next unit answers
Program unit as
number [1- 9]
Hang up
End programming?
Unit programming is done
Remotely program unit numbers in SafeLines connected in
series: