7
4,5
139,3
149,25
63,27
86,55
52,05
17,8
2
SafeLine LEO 4 v.1.02 EN
Overview
Overview
1. CAN LED’s:
Two LED’s indicating the current status of the CAN bus. They also
flicker back and forth during the CAN bus auto baud rate detect.
2. CAN Termination
Slide switch used for setting the termination resistor, either on or off.
3. CAN connectors
Two connectors used for connecting the CAN bus and power to
the product.
4. Breather LED:
Early during the boot process, the breather LED is lit, and it re-
mains fully lit until the SafeLine LEO FDT4-CAN application takes
over and the LED begins to “breathe”.
5. Inputs and outputs
The SafeLine LEO FDT4-CAN have a total of 4 inputs and outputs.
All of them are I/O.
6. Internal speaker
Intended to be used only for arrival chime. For any other sound use
an external speaker – connect to .7.
7. Loudspeaker
This connector is used for an optional loudspeaker, used for floor
speech, button acknowledgment or other sounds.
8. SD-card
Stores the optional graphic and sound files. May also be used for
upgrading the built-in software.
