Safeline GL4 Скачать руководство пользователя страница 5

5

© 2012 SafeLine and all the SafeLine products and accessories are copyrighted by law.

GL4 v1.13 EN

Installation

Insert the SIM card by gently pushing it into the SIM card holder. 
Please note the bevelled corner of the SIM card. 

USING THE SIM CARD

Before you can start using a new SIM card, the card has to be prepared.

The SafeLine GL4  can only recognize the PIN code if the code is set to “0000”, “1234”, “1111” or if it is 
deactivated. If the PIN code is set to “0000” or if it is deactivated the SIM card can be moved from the 
SafeLine GL4 to any of SafeLine GSM products. If the code is set to “1234” the SIM card can be moved to 
another SafeLine GL1/GL2/GL4/GL5 unit if the software version is 3.10 or higher.

If the PIN code is set to “1111” the SIM card cannot be moved to any other telephone (SafeLine or other-
wise) without the PUK code.

PIN code (set to “0000”, “1234” or deactivate).

1. 

Insert the SIM card in an ordinary cellular phone. In the “Security settings”  menu, change the PIN 
code to “0000”. If this is not possible , set the PIN code to “1234” or set the ”PIN code request” 
option  to “OFF”.

2. 

Verify the PIN code by switching your phone off and on again.

3. 

Make a call from your phone to verify that the SIM card is active, before you move it to the 
SafeLine GL4.

4. 

Also make a call to SafeLine GL4 after insertion to check that it is possible to get a proper 
connection.

You can protect the SIM card against unauthorized use.

1. 

Insert the SIM card in a cellular phone.

2. 

In the “Security settings” menu, change the PIN code to “1111”. When the SIM card is inserted in 
the SafeLine GL4, the code will be changed to a random number, thus making it impossible to use 
the card in another cellular phone unless it is unblocked by means of the PUK code.

NOTE!

If you enter the wrong PIN code 3 times, the SIM card will be blocked (requires 
PUK code to de-block). The GL4 cannot be started and the LED (4) will be red.

If PIN code id “1234”, make sure the SafeLine GL4 software is V3.10 or higher.

NOTE!

Disconnect both main and battery plugs, before 
inserting or extracting the SIM card.

Содержание GL4









Отзывы: