2
IMPORTANT: READ ALL INSTRUCTIONS BEFORE USE
Before using these truck ramps, be sure to read all content within this manual, ensuring that you
understand the operating procedures, maintenance requirements and all safety warnings.
The owner and/or operator shall have an understanding of the product, its operating characteristics, and
safety operating instructions before operating this device. Safety information shall be emphasized and
understood. If the operator is not fluent in English, the product and safety instructions shall be read to and
discussed with the operator in the operator’s native language by the purchaser/owner or his designee,
making sure that the operator comprehends their contents.
Actions to help prevent dangerous situations
Study, understand and follow all instructions before operating this device.
Use as a matched pair only.
Maximum load capacity per matched pair shall not exceed the rated capacity of the individual
ramp.
Use only on hard, level surfaces.
Lift only on areas of the vehicle as specified by the vehicle manufacturer.
No alterations shall be made to this product.
Use ramps to support one end of a vehicle only.
Center load on the ramp.
Never use truck ramps to support both ends or one side of a vehicle.
Failure to heed these warnings may result in serious personal injury / property damage.
Inspection
This device shall be inspected immediately if the device is believed to have been subjected to an
abnormal load or shock. It is recommended that this inspection be made by a manufacturer’s or
supplier’s authorized repair facility.
Owners and/or operators should be aware that repair of this equipment may require specialized
knowledge and facilities. It is recommended that an annual inspection of the product be made by a
manufacturer’s or supplier’s authorized repair facility and that any defective parts, decals, or safety
labels or signs be replaced with manufacturer’s or supplier’s specified parts.
Damaged Equipment and add-ons
Any truck ramp that appears to be damaged, is found to be worn or operates abnormally in any way will be
removed from service and destroyed immediately.
Alterations
Because of potential hazards associated with this type of equipment, no alterations shall be made to the
product.
Attachments and Adapters
Only attachments and/or adapters supplied by the manufacturer shall be used.
Setup
Prior to each use, visual inspection (See Pg.2 ) shall be made to the device by checking for abnormal
conditions, such as cracked welds, damaged, loose or missing parts.