background image

1 SAFETY INSTRUCTIONS

Before using this product, carefully read this user manual. Failure to follow these safety instructions could result in fire, electric shock, injury, 

or damage to Safe Spacer or other property. Do not dispose of this manual. Ensure that this information is retained and used appropriately by 

the product user.
•  Users must fully understand and strictly observe the instructions. Use the product only for the purposes specified in this document. 

Comply with all local and national rules and regulations associated with this product.

•  Users must be familiar with the relevant safety concepts of the industrial environment they are operating in, as well as applicable 

standards and other regulations. Always obey site-specific signs and instructions.

RF EXPOSURE AND INTERFERENCE

S-Bridge uses radio signals to connect other devices. It is designed, tested, and manufactured to comply with regulations governing radio 

frequency emissions. Even so, radio-signal emitting devices can negatively affect the operation of other electronic equipment, causing them to 

malfunction.

POSSIBLE MEDICAL DEVICE INTERFERENCE

S-Bridge contains components that emit electromagnetic fields. This may interfere with medical devices, such as pacemakers and 

defibrillators. Consult your physician and medical device manufacturer for information specific to your medical device and whether you need 

to maintain a safe distance of separation between your medical device and S-Bridge.
If you suspect S-Bridge is interfering with your medical device, stop using it immediately and consult your physician.

NOT FOR USE IN A POTENTIALLY EXPLOSIVE ENVIRONMENT

Using S-Bridge in any area with a potentially explosive atmosphere, such as areas where the air contains high levels of flammable chemicals, 

vapors, or particles (such as grain, dust, or metal powders), may be hazardous.
Exposing S-Bridge to environments having high concentrations of industrial chemicals may damage or impair S-Bridge functionality.

1.1 REPAIR AND MODIFICATIONS

•  Only trained and competent personnel are permitted to inspect, repair and service S-Bridge.
•  Use only original parts and accessories for using and maintaining this product. Otherwise, the correct functioning of the product could be 

impaired.

 

CAUTION: Modifications to any component of S-Bridge are not permitted, as they can endanger your safety or damage the 

device. Disassembling S-Bridge may cause damage, result in loss of water resistance, and may cause injury to the user.

 

EUROPEAN UNION—DISPOSAL INFORMATION

The symbol above means that according to local laws and regulations your product and/or its battery shall be 

disposed of separately from household waste. When this product reaches its end of life, take it to a collection 

point designated by local authorities. The separate collection and recycling of your product and/or its battery at 

the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects 

human health and the environment.

3

Содержание S-Bridge












Отзывы: