Flashback Version
TB-100 Bluetooth Transmitter Hardware Installation Guide
P a g e 4
Safe Fleet Mobile-Vision
9.26.2019
Make the wiring connections (cont’d)
Wire
Color
Connect to…
FB REC LED
Orange Orange wire on Flashback Pigtail cable
GROUND
Black
Same ground location as Flashback
12V BATTERY
Red
2-amp fuse, then to battery positive
IGNITION
White
2-amp fuse, then to white wire on Flashback Pigtail cable
TO DVR AUX 1 or AUX 2 Gray
To the brown Aux 1 wire or gray Aux 2 wire
Connect the Flashback Pigtail cable (ZCA-TM010002) to the white lead on the back
of the Flashback monitor cable
Reconnect negative lead of vehicle battery
Configure the Flashback to support remote transmission
.
This procedure may vary
depending on whether or not your agency is using the Fleet Management feature.
If Fleet Management is
on
, perform this task from the server, as described in “From
DES” below. If Fleet Management is
off
, perform this task from the DVR, as described in
“From Flashback3 or FlashbackHD” on the next page or “From Flashback2” on page 6.
From DES
:
a.
Login to your DES video management software as an Admin user.
b.
Open the DVR record for the Flashback that will be connected to this Bluetooth
Transmitter.
11
9
10
