Safe Fleet RVS-619NQ, Инструкция по эксплуатации

Страница: 18 / 22

18
© Rear View Safety
TROUBLESHOOTING
Monitor Displays Blue Screen & Displays No Signal
•
Do a hard reset, unplug all cables and power cables and leave out for 1
minute and then re-connect them.
•
Check to ensure that the connection to the camera is tight.
•
Verify camera cable is plugged into port labeled Backup Camera
•
Verify that the blue positive trigger on power harness is put to power 12v+.
•
If the problem still persists, verify that alternate ports work. If alternate
ports do not work, remove Blue Trigger wire from 12V+ and select alternate
channels.
Monitor Will Not Power-Up (no backlight on power button)
•
Check fuse
•
Check 12v+ to monitor
•
Check ground connection
No Image On Screen
•
Verify camera is in correct camera input
•
Verify cable is connected to monitor
•
Verify camera is connected to cable
•
Connect known working camera and cable to monitor.
•
Verify Blue trigger is receiving power
Audio on Camera (optional)
•
Verify chosen camera has audio
•
Verify volume setting
•
Confirm that the Blue audio trigger is connected to 12v+